8 ports 2.6G 8T8R BF HEA
- KS90D2327A8-18F-I-W
- Base Station Antennas
- 2300-2690
- 18
- 90
- ±45°
8 ports 2.6G 8T8R BF HEA
8-Ports TDD Smart Antenna
TDD Serial Antenna
General Electrical Properties | ||||
General parameters | Frequency Range (MHz) | 2300-2400 | 2490-2690 | |
Polarization | ±45° | |||
Electrical Downtilt (°) | 2-12, continuously adjustable | |||
Max. power per port (W) | 60 (at 50℃ ambient temperature) | |||
Impedance (Ω) | 50 | |||
Grounding | DC Grounding | |||
Calibration and electrical parameters | Coupling factor between calibration port and each antenna port (dB) | -26±2 | ||
Max. amplitude tolerance from calibration port to input ports (dB) | 0.9 | |||
Max. phase tolerance from calibration port to input ports (°) | 7 | |||
VSWR | ≤1.5 | |||
Co-polarization isolation between ports (dB) | 2°~6°≥20; 7°~12°≥28 | |||
Cross-polarization isolation between ports (dB) | 2°~6°≥25; 7°~12°≥28 | |||
TDD LTE Electrical Specifications | ||||
Radiation parameters
| Frequency Range (MHz) | 2300-2400 | 2490-2690 | |
Single column beam | Gain (dBi) | 17±0.8 | 17.8±0.9 | |
Horizontal 3dB Beam Width (°) | 84±10 | 73±5 | ||
Front to Back Ratio (dB) | >25 | >25 | ||
Cross-Polar Ratio, 0° (dB) | >18 | >18 | ||
Vertical 3dB Beam Width (°) | 6.2±0.5 | 5.7±0.5 | ||
Side lobe suppression for first side lobe above main beam (dB) | >16 | >16 | ||
65° Broadcast beam | Gain (dBi) | 17.0±0.6 | 17.8±0.9 | |
Horizontal 3dB Beam Width (°) | 56±13 | 54±14 | ||
Front to Back Ratio (dB) | >25 | >25 | ||
Vertical 3dB Beam Width (°) | 6.2±0.5 | 5.7±0.6 | ||
Cross-Polar Ratio, 0° (dB) | >18 | >18 | ||
Side lobe suppression for first side lobe above main beam (dB) | >16 | >16 | ||
Service beam | 0° direction Beam Gain (dBi) | 21±0.5 | 21.5±0.8 | |
0° direction Beam Horizontal 3dB Beam Width (°) | 22 | 20 | ||
0° direction Beam horizontal side lobe suppression (dB) | >15 | >15 | ||
0° direction Beam Front to Back Ratio, ±30° (dB) | >30 | >30 | ||
0° direction Beam Cross-Polar Ratio, 0° (dB) | >20 | >20 | ||
Values based on NGMN recommendations on Base Station Antenna Standards V12.0 (BASTA V12.0) | ||||
Mechanical Specifications | |
RET type | Integrated RET (AISG2.0/3GPP) |
AISG Connectors (1 in 1 out) | 2 x 5 pin (in: Male; out: Female) |
Connector | 1 x MQ4 Male + 1 x MQ5 Male (Bottom) |
Antenna dimensions (H x W x D) (mm) | 1380 x 318 x 129 |
Packing dimensions (H x W x D) (mm) | 1465 x 410 x 295 |
Antenna weight (kg) | 16.5 |
Clamps weight (kg) | 5.5 |
Diameter of installation pole (mm) | φ55-φ115 |
Radome material | Fiberglass |
Radome color | Light grey |
Operational temperature (℃) | -40 to +65 |
Wind load at 42m/s (N) | 609/ 173/ 666 (Frontal/ Lateral/ Rearal) |
Max. operational wind speed (km/h) | 200 |
