16 ports 2L2H+8T8R(1727) BF 2.5m Antenna

Frequency Range(MHz)

 2*(690 – 960) (R1,R2)

698-803

803-880

880-960

Polarization

±45°

Electrical Downtilt()

2-12, Independently continuously adjustable

Gain (dBi)

at mid Tilt

15.7

16.1

16.4

over all Tilts

15.6±0.9

16.0±0.7

16.3±0.8

Side lobe suppression for first side lobe above main beam (dB)

>15

>15

>15

Horizontal 3dB Beam Width ()

65±7

61±7

58±7

Vertical 3dB Beam Width()

10.3±0.8

9.2±0.7

8.4±0.7

Cross-Polar Ratio , 0°(dB)

>18

>18

>18

Front to Back Ratio,±30° ( dB)

>21

>22

>22

Frequency Range(MHz)

2*(1710 – 2690) (Y1,Y6)

1710-1880

1880-2200

2496-2690

Polarization

±45

Electrical Downtilt(°)

2-12,Independently continuously Adjustable

Gain (dBi)

at mid Tilt

16.7

17.3

18.4

over all Tilts

16.5±0.6

17.2±0.7

18.3±0.7

Side lobe suppression for first side lobe above main beam (dB)

>16

>16

>15

Horizontal 3dB Beam Width ()

69±7

67±6

58±5

Vertical 3dB Beam Width()

6.9±0.6

6.2±0.7

4.7±0.4

CPR at Boresight (dB)

>17

>21

>21

Front to Back Ratio ,30° ( dB)

>25

>28

>26

VSWR

≤ 1.5

Intermodulation IM3 (dBc)

≤-153 (2 x 43 dBm carrier)

Cross Polar isolation (dB)

≥ 25(R1,R2); ≥ 27(Y1, Y6);

Interband isolation (dB)

≥ 25

Max. power per port(W)

250 (R1,R2);200 (Y1, Y6)

Impedance (Ω)

50

Grounding

DC Ground

Values based on NGMN recommendations on Base Station Antenna Standards V12.0(BASTA V12.0)

General parameters

Frequency Range(MHz)

4*(1710 – 2690)（Y2, Y3, Y4, Y5）

1710-2200

2496-2690

Polarization

±45

Electrical Downtilt()

2-12, continuously adjustable

Electrical downtilt toterance(°)

±1

Max. power per unit(W)

50(at 50℃ ambient temperature)

Impedance(Ω)

50

Grounding

DC Ground

Calibration and electrical parameters

Coupling factor between calibration port and each antenna port(dB)

-26±2

Max. amplitude tolerance from calibration port to input ports(dB)

0.9

Max. phase tolerance from calibration port to input ports(°)

7

VSWR

≤ 1.5

Co-polarization isolation between ports(dB)

≥ 20

Cross-polarization isolation between ports(dB)

≥ 23

FDD LTE Electrical Specifications

Radiation parameters

Frequency Range(MHz)

4*(1710 – 2690)（Y2, Y3, Y4, Y5）

1710-2200

2496-2690

Single column beam

Gain(dBi)

15.0±0.6

15.7±0.6

Horizontal 3dB Beam Width ()

95±10

85±10

Front to back ratio (dB)

> 25

> 25

Cross-Polar Ratio, 0°(dB)

> 17

> 17

Vertical 3dB Beam Width()

8.8±0.5

6.6±0.5

Side lobe suppression for first side lobe above main beam (dB)

> 16

> 16

NR

Broadcast beam

Gain(dBi)

20.2±0.6

20.6±0.6

Horizontal 3dB Beam Width (), Typical

65

65

Front to back ratio (dB)

> 25

> 25

Vertical 3dB Beam Width()

8.8±0.6

6.6±0.7

Side lobe suppression for first side lobe above main beam (dB)

> 15

> 15

Service beam

Gain(dBi)

20.2±0.6

20.6±0.6

Horizontal 3dB Beam Width ()

26

24

Front to back ratio (dB)

> 30

> 30

Cross-Polar Ratio, 0°(dB)

> 20

> 20

Beam Isolation (dB)

> 20

> 20

RET type

Integrated RET (AISG2.0/3GPP)

AISG Connectors（2 in 2 out ）

4x8 pin（in：Male；out：Female）

Connector

8 x 4.3-10 Female, 1 x (MQ4+MQ5), Bottom

Antenna dimensions (H x W x D) (mm)

2300x500x160

Packing dimensions (H x W x D) (mm)

2600x615x290

Antenna weight (kg)

40.1

Clamps weight (kg)

6.8

Diameter of installation pole(mm)

φ50-φ125

Radome material

Fiberglass

Radome color

Light grey

Operational temperature (℃)

-40 to +60

Wind load at 42m/s (N)

1392/422/1392 (Frontal/Lateral/Rearal)

Max. operational wind speed (km/h)

200