12 ports 2L+8TR(2327) BF 2.5m Antenna

- KB65D90D0727A12-17D16F-I-W
- Base Station Antennas
- 690–960/2300-2690
- 17/16
- 65/90
- ±45°
12 ports 2L+8TR(2327) BF 2.5m Antenna
F+D Hybrid Serial Antenna
Electrical Specifications | ||||
Frequency Range (MHz) | 2 x 690–960 (R1, R2) | |||
690-803 | 791-862 | 880-960 | ||
Polarization | ±45 | |||
Electrical Downtilt () | 2-12, Independently continuously adjustable | |||
Gain (dBi) | at mid Tilt | 16.1 | 16.7 | 17.1 |
over all Tilts | 16.0±0.7 | 16.6±0.7 | 17.0±0.6 | |
Side lobe suppression for first side lobe above main beam (dB) | >15 | >15 | >15 | |
Horizontal 3dB Beam Width () | 66±7 | 61±6 | 61±6 | |
Vertical 3dB Beam Width () | 8.8±0.8 | 8.1±0.5 | 7.2±0.6 | |
Cross-Polar Ratio, 0° (dB) | >18 | >18 | >18 | |
Front to Back Ratio, ±30° ( dB) | >21 | >21 | >21 | |
VSWR | ≤1.5 | |||
Intermodulation IM3 (dBc) | ≤-153 (2 x 43 dBm carrier) | |||
Cross Polar Isolation (dB) | ≥25 (R1, R2); | |||
Interband isolation (dB) | ≥25 | |||
Max. power per port (W) | 250 (R1, R2); 200 (Y1, Y2, Y3, Y4) | |||
Impedance (Ω) | 50 | |||
Grounding | DC Grounding | |||
Values based on NGMN recommendations on Base Station Antenna Standards V12.0 (BASTA V12.0) |
TDD LTE Electrical Specifications | |||
Radiation parameters | Frequency Range (MHz) | 2300-2690(Y1) | |
Single column beam | Gain (dBi) | 15.3±1.0 | |
Horizontal 3dB Beam Width () | 95±15 | ||
Front to Back Ratio, ±30° (dB) | >23 | ||
Cross-Polar Ratio, 0° (dB) | >18 | ||
Vertical 3dB Beam Width () | 5.7±0.7 | ||
Side lobe suppression for first side lobe above main beam (dB) | >16 | ||
65° Broadcast beam | Gain (dBi) | 16.4±1.4 | |
Horizontal 3dB Beam Width () | 68±13 | ||
Front to Back Ratio, ±30° (dB) | >23 | ||
Vertical 3dB Beam Width () | 5.6±0.6 | ||
Side lobe suppression for first side lobe above main beam (dB) | >16 | ||
Service beam | 0° direction Beam Gain (dBi) | 19.7±1.0 | |
0° direction Beam Horizontal 3dB Beam Width (°) | 27 | ||
0° direction Beam horizontal side lobe suppression (dB) | >16 | ||
0° direction Beam Front to Back Ratio, ±30° (dB) | >25 | ||
0° direction Beam Cross-Polar Ratio, 0° (dB) | >18 |
Mechanical Specifications | |
RET type | Integrated RET (AISG2.0/3GPP) |
AISG Connectors (1 in 1 out) | 2 x 8 pin (in: Male; out: Female) |
Connector | 12 × 7/ 16 Female , Cal : 1 × N Female, Bottom |
Antenna dimensions (H x W x D) (mm) | 2560 x 469 x 185 |
Packing dimensions (H x W x D) (mm) | 2850 × 535 × 247 |
Antenna weight (kg) | 40 |
Clamps weight (kg) | 6.3 |
Diameter of installation pole(mm) | φ50 -φ110 |
Radome material | Fiberglass |
Radome color | Light grey |
Operational temperature (℃) | -40 to +70 |
Wind load at 42m/s (N) | 1440/ 521/ 1528 (Frontal/ Lateral/ Rearal) |
Max. operational wind speed (km/h) | 200 |