12 ports 2L6H 2.75m Antenna
- KB65D0727A16-17D18S-I-W
- Base Station Antennas
- 690-960/1695–2690
- 17/18
- 65
- ±45°
12 ports 2L6H 2.75m Antenna
FDD Serial Antenna
Electrical Specifications |
|
| ||||||||
Frequency Range (MHz) | 2 × (690-960) (R1, R2) | |||||||||
690-824 | 806-896 | 880-960 | ||||||||
Polarization | ±45° | |||||||||
Electrical Downtilt (°) | 2-12, continuously adjustable | |||||||||
Gain (dBi) | At mid tilt | 16.2 | 16.5 | 17.1 | ||||||
Over all tilts | 16.1±0.9 | 16.4±0.9 | 17.0±0.6 | |||||||
Side lobe suppression for first side lobe above main beam (dB) | >15 | >15 | >16 | |||||||
Horizontal 3dB Beam Width (°) | 66±6.5 | 62±5.5 | 61±5.5 | |||||||
Vertical 3dB Beam Width (°) | 8.5±0.7 | 7.7±0.7 | 7.1±0.7 | |||||||
Front to Back Ratio, ±30° (dB) | >22 | >24 | >25 | |||||||
Cross-Polar Ratio, 0° (dB) | >17 | >17 | >18 | |||||||
Frequency Range (MHz) | 3 × (1695-2690) (Y1, Y3, Y5) | |||||||||
1695-1880 | 1850-1990 | 1920-2170 | 2300-2400 | 2490-2690 | ||||||
Polarization | ±45° | |||||||||
Electrical Downtilt (°) | 2-12, continuously adjustable | |||||||||
Gain (dBi) | At mid tilt | 17.1 | 17.2 | 17.2 | 17.5 | 17.8 | ||||
Over all tilts | 16.9±0.5 | 17.1±0.5 | 17.2±0.8 | 17.5±0.9 | 17.7±1.0 | |||||
Side lobe suppression for first side lobe above main beam (dB) | >16 | >16 | >16 | >14 | >14 | |||||
Horizontal 3dB Beam Width (°) | 63±8.5 | 62±6.5 | 60±8.0 | 56±7.0 | 56±6.5 | |||||
Vertical 3dB Beam Width (°) | 7.1±0.8 | 6.4±0.6 | 6.1±0.7 | 5.3±0.5 | 4.8±0.6 | |||||
Front to Back Ratio, ±30° (dB) | >25 | >25 | >25 | >26 | >26 | |||||
Cross-Polar Ratio, 0° (dB) | >16 | >16 | >17 | >17 | >17 | |||||
Frequency Range (MHz) | 3 × (1695-2690) (Y2, Y4, Y6) | |||||||||
1695-1880 | 1850-1990 | 1920-2170 | 2300-2400 | 2490-2690 | ||||||
Polarization | ±45° | |||||||||
Electrical Downtilt (°) | 2-12, continuously adjustable | |||||||||
Gain (dBi) | At mid tilt | 16.6 | 16.9 | 16.9 | 17.3 | 17.4 | ||||
Over all tilts | 16.5±0.8 | 16.9±0.7 | 16.8±0.8 | 17.1±0.9 | 17.3±1.0 | |||||
Side lobe suppression for first side lobe above main beam (dB) | >16 | >16 | >16 | >14 | >14 | |||||
Horizontal 3dB Beam Width (°) | 63±8.5 | 64±6.5 | 61±8.0 | 57±7.0 | 56±6.5 | |||||
Vertical 3dB Beam Width (°) | 7.1±0.8 | 6.4±0.6 | 6.1±0.7 | 5.3±0.5 | 4.8±0.6 | |||||
Front to Back Ratio, ±30° (dB) | >25 | >25 | >25 | >26 | >26 | |||||
Cross-Polar Ratio, 0° (dB) | >16 | >16 | >17 | >17 | >17 | |||||
VSWR | ≤1.5 | |||||||||
Cross Polar Isolation (dB) | ≥ 26 | |||||||||
Interband isolation (dB) | ≥ 26 | |||||||||
Intermodulation IM3 (dBc) | ≤-153 (2 x 43 dBm carrier) | |||||||||
Max. power per port (W) | 200 | |||||||||
Impedance (Ω) | 50 | |||||||||
Grounding | DC Grounding | |||||||||
Values based on NGMN recommendations on Base Station Antenna Standards V12.0(BASTA V12.0) | ||||||||||
Mechanical Specifications
RET type | Integrated RET (AISG2.0/3GPP) |
AISG Connectors (1 in 1 out/ 2 in 2 out) | 2x8 pin/ 4x8 pin (in: Male; out: Female) |
Connector | 16 x 4.3-10 Female, Bottom |
Antenna dimensions (H x W x D) (mm) | 2750 x 467 x 167 |
Packing dimensions (H x W x D) (mm) | 2930 x 542 x 277 |
Antenna weight (kg) | 45 |
Clamps weight (kg) | 9 |
Diameter of installation pole (mm) | f50~f125 |
Tilt Bracket (°) | 0~10 |
Radome material | Fiberglass |
Radome color | Light grey |
Operational temperature (℃) | -40 to +60 |
Wind load at 42m/s (N) | 1185/ 525/ 1325 (Frontal/ Lateral/ Rearal) |
Max. operational wind speed (km/h) | 200 |
